Tuesday 10 February 2015

Basic Networking Interview Questions with answer (Part2)

Below are some important Networking interview questions which are asked in most MNC company interviews for beginners or professionals.

11. Explain passive topology
When the computers on the network simply listen and receive the signal, they are referred to as passive because they donĂ¢€™t amplify the signal in any way. Example for passive topology - linear bus.

12. What are the important topologies for networks
BUS topology:
In this each computer is directly connected to primary network cable in a single line.
Advantages:
Inexpensive, easy to install, simple to understand, easy to extend.

STAR topology:
In this all computers are connected using a central hub.
Advantages:
Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.

RING topology:
In this all computers are connected in loop.
Advantages:
All computers have equal access to network media, installation can be simple, and signal does not degrade as much as in other topologies because each computer
regenerates it.

13. What are major types of networks and explain
Server-based network
Peer-to-peer network
Peer-to-peer network, computers can act as both servers sharing resources and as clients using the resources.
Server-based networks provide centralized control of network resources and rely on server computers to provide security and network administration

14. Explain Protocol Data Unit
The data unit in the LLC level is called the protocol data unit (PDU). The PDU contains of four fields a destination service access point (DSAP), a source service access point (SSAP), a control field and an information field. DSAP, SSAP are addresses used by the LLC to identify the protocol stacks on the receiving and sending machines that are generating and using the data. The control field specifies whether the PDU frame is a information frame (I - frame) or a supervisory frame (S - frame) or a unnumbered frame (U - frame).

15. Explain difference between baseband and broadband transmission
In a baseband transmission, the entire bandwidth of the cable is consumed by a single signal. In broadband transmission, signals are sent on multiple frequencies, allowing multiple signals to be sent simultaneously.

16. What are the possible ways of data exchange
(i) Simplex (ii) Half-duplex (iii) Full-duplex.

17. What are the types of Transmission media
Signals are usually transmitted over some transmission media that are broadly classified in to two categories.

Guided Media:
These are those that provide a conduit from one device to another that include twisted-pair, coaxial cable and fiber-optic cable. A signal traveling along any of these media is directed and is contained by the physical limits of the medium. Twisted-pair and coaxial cable use metallic that accept
and transport signals in the form of electrical current. Optical fiber is a glass or plastic cable that accepts and transports signals in the form of light.

Unguided Media:
This is the wireless media that transport electromagnetic waves without using a physical conductor. Signals are broadcast either through air. This is done through radio communication, satellite communication and cellular telephony.

18. Explain point-to-point protocol
A communications protocol used to connect computers to remote networking services including Internet service providers.

19. What are the two types of transmission technology available
(i) Broadcast and (ii) point-to-point

20. Difference between the communication and transmission.
Transmission is a physical movement of information and concern issues like bit polarity, synchronization, clock etc. Communication means the meaning full exchange of information between two communication media.
More Questions & Answers :-
Part1  Part2  Part3  Part4  Part5  Part6  Part7  Part8  Part9  Part10

No comments:

Post a Comment