Below are some important SQL Server DBA interview questions which are asked in most MNC company interviews for beginners or professionals.
21. What is RAID and what are different types of RAID configurations?
RAID stands for Redundant Array of Inexpensive Disks, used to provide fault tolerance to database servers. There are six RAID levels 0 through 5 offering different levels of performance, fault tolerance. MSDN has some information about RAID levels and for detailed information, check out the RAID advisory board's homepage.
22. What are the steps you will take, if you are tasked with securing an SQL Server?
Again this is another open ended question. Here are some things you could talk about: Preferring NT authentication, using server, databse and application roles to control access to the data, securing the physical database files using NTFS permissions, using an unguessable SA password, restricting physical access to the SQL Server, renaming the Administrator account on the SQL Server computer, disabling the Guest account, enabling auditing, using multiprotocol encryption, setting up SSL, setting up firewalls, isolating SQL Server from the web server etc.
23. What is a deadlock and what is a live lock? How will you go about resolving deadlocks?
Deadlock is a situation when two processes, each having a lock on one piece of data, attempt to acquire a lock on the other's piece. Each process would wait indefinitely for the other to release the lock, unless one of the user processes is terminated. SQL Server detects deadlocks and terminates one user's process.
A livelock is one, where a request for an exclusive lock is repeatedly denied because a series of overlapping shared locks keeps interfering. SQL Server detects the situation after four denials and refuses further shared locks. A livelock also occurs when read transactions monopolize a table or page, forcing a write transaction to wait indefinitely.
24. How to restart SQL Server in single user mode? How to start SQL Server in minimal configuration mode?
SQL Server can be started from command line, using the SQLSERVR.EXE. This EXE has some very important parameters with which a DBA should be familiar with. -m is used for starting SQL Server in single user mode and -f is used to start the SQL Server in minimal confuguration mode. Check out SQL Server books online for more parameters and their explanations.
25. As a part of your job, what are the DBCC commands that you commonly use for database maintenance?
DBCC CHECKDB, DBCC CHECKTABLE, DBCC CHECKCATALOG, DBCC CHECKALLOC, DBCC SHOWCONTIG, DBCC SHRINKDATABASE, DBCC SHRINKFILE etc. But there are a whole load of DBCC
commands which are very useful for DBAs. Check out SQL Server books online for more information.
26. What are statistics, under what circumstances they go out of date, how do you update them?
Statistics determine the selectivity of the indexes. If an indexed column has unique values then the selectivity of that index is more, as opposed to an index with non-unique values. Query optimizer uses these indexes in determining whether to choose an index or not while executing a query.
Some situations under which you should update statistics:
1) If there is significant change in the key values in the index
2) If a large amount of data in an indexed column has been added, changed, or removed (that is, if the distribution of key values has changed), or the table has been truncated using the TRUNCATE TABLE statement and then repopulated
3) Database is upgraded from a previous version
Look up SQL Server books online for the following commands: UPDATE STATISTICS, STATS_DATE, DBCC SHOW_STATISTICS, CREATE STATISTICS, DROP STATISTICS, sp_autostats, sp_createstats, sp_updatestats
27. What are the different ways of moving data/databases between servers and databases in SQL Server?
There are lots of options available, you have to choose your option depending upon your requirements. Some of the options you have are: BACKUP/RESTORE, dettaching and attaching databases, replication, DTS, BCP, logshipping, INSERT...SELECT, SELECT...INTO, creating INSERT scripts to generate data.
28. Explian different types of BACKUPs avaialabe in SQL Server? Given a particular scenario, how would you go about choosing a backup plan?
Types of backups you can create in SQL Sever 7.0+ are Full database backup, differential database backup, transaction log backup, filegroup backup. Check out the BACKUP and RESTORE commands in SQL Server books online. Be prepared to write the commands in your interview. Books online also has information on detailed backup/restore architecture and when one should go for a particular kind of backup.
29. What is database replicaion? What are the different types of replication you can set up in SQL Server?
Replication is the process of copying/moving data between databases on the same or different servers. SQL Server supports the following types of replication scenarios:
· Snapshot replication
· Transactional replication (with immediate updating subscribers, with queued updating subscribers)
· Merge replication
30. What are cursors? Explain different types of cursors. What are the disadvantages of cursors? How can you avoid cursors?
Cursors allow row-by-row prcessing of the resultsets.
Types of cursors: Static, Dynamic, Forward-only, Keyset-driven. See books online for more information.
Disadvantages of cursors: Each time you fetch a row from the cursor, it results in a network roundtrip, where as a normal SELECT query makes only one rowundtrip, however large the resultset is. Cursors are also costly because they require more resources and temporary storage (results in more IO operations). Furthere, there are restrictions on the SELECT statements that can be used with some types of cursors.
Most of the times, set based operations can be used instead of cursors. Here is an example:
If you have to give a flat hike to your employees using the following criteria:
Salary between 30000 and 40000 -- 5000 hike
Salary between 40000 and 55000 -- 7000 hike
Salary between 55000 and 65000 -- 9000 hike
In this situation many developers tend to use a cursor, determine each employee's salary and update his salary according to the above formula. But the same can be achieved by multiple update statements or can be combined in a single UPDATE statement as shown below:
UPDATE tbl_emp SET salary =
CASE WHEN salary BETWEEN 30000 AND 40000 THEN salary + 5000
WHEN salary BETWEEN 40000 AND 55000 THEN salary + 7000
WHEN salary BETWEEN 55000 AND 65000 THEN salary + 10000
END
21. What is RAID and what are different types of RAID configurations?
RAID stands for Redundant Array of Inexpensive Disks, used to provide fault tolerance to database servers. There are six RAID levels 0 through 5 offering different levels of performance, fault tolerance. MSDN has some information about RAID levels and for detailed information, check out the RAID advisory board's homepage.
22. What are the steps you will take, if you are tasked with securing an SQL Server?
Again this is another open ended question. Here are some things you could talk about: Preferring NT authentication, using server, databse and application roles to control access to the data, securing the physical database files using NTFS permissions, using an unguessable SA password, restricting physical access to the SQL Server, renaming the Administrator account on the SQL Server computer, disabling the Guest account, enabling auditing, using multiprotocol encryption, setting up SSL, setting up firewalls, isolating SQL Server from the web server etc.
23. What is a deadlock and what is a live lock? How will you go about resolving deadlocks?
Deadlock is a situation when two processes, each having a lock on one piece of data, attempt to acquire a lock on the other's piece. Each process would wait indefinitely for the other to release the lock, unless one of the user processes is terminated. SQL Server detects deadlocks and terminates one user's process.
A livelock is one, where a request for an exclusive lock is repeatedly denied because a series of overlapping shared locks keeps interfering. SQL Server detects the situation after four denials and refuses further shared locks. A livelock also occurs when read transactions monopolize a table or page, forcing a write transaction to wait indefinitely.
24. How to restart SQL Server in single user mode? How to start SQL Server in minimal configuration mode?
SQL Server can be started from command line, using the SQLSERVR.EXE. This EXE has some very important parameters with which a DBA should be familiar with. -m is used for starting SQL Server in single user mode and -f is used to start the SQL Server in minimal confuguration mode. Check out SQL Server books online for more parameters and their explanations.
25. As a part of your job, what are the DBCC commands that you commonly use for database maintenance?
DBCC CHECKDB, DBCC CHECKTABLE, DBCC CHECKCATALOG, DBCC CHECKALLOC, DBCC SHOWCONTIG, DBCC SHRINKDATABASE, DBCC SHRINKFILE etc. But there are a whole load of DBCC
commands which are very useful for DBAs. Check out SQL Server books online for more information.
26. What are statistics, under what circumstances they go out of date, how do you update them?
Statistics determine the selectivity of the indexes. If an indexed column has unique values then the selectivity of that index is more, as opposed to an index with non-unique values. Query optimizer uses these indexes in determining whether to choose an index or not while executing a query.
Some situations under which you should update statistics:
1) If there is significant change in the key values in the index
2) If a large amount of data in an indexed column has been added, changed, or removed (that is, if the distribution of key values has changed), or the table has been truncated using the TRUNCATE TABLE statement and then repopulated
3) Database is upgraded from a previous version
Look up SQL Server books online for the following commands: UPDATE STATISTICS, STATS_DATE, DBCC SHOW_STATISTICS, CREATE STATISTICS, DROP STATISTICS, sp_autostats, sp_createstats, sp_updatestats
27. What are the different ways of moving data/databases between servers and databases in SQL Server?
There are lots of options available, you have to choose your option depending upon your requirements. Some of the options you have are: BACKUP/RESTORE, dettaching and attaching databases, replication, DTS, BCP, logshipping, INSERT...SELECT, SELECT...INTO, creating INSERT scripts to generate data.
28. Explian different types of BACKUPs avaialabe in SQL Server? Given a particular scenario, how would you go about choosing a backup plan?
Types of backups you can create in SQL Sever 7.0+ are Full database backup, differential database backup, transaction log backup, filegroup backup. Check out the BACKUP and RESTORE commands in SQL Server books online. Be prepared to write the commands in your interview. Books online also has information on detailed backup/restore architecture and when one should go for a particular kind of backup.
29. What is database replicaion? What are the different types of replication you can set up in SQL Server?
Replication is the process of copying/moving data between databases on the same or different servers. SQL Server supports the following types of replication scenarios:
· Snapshot replication
· Transactional replication (with immediate updating subscribers, with queued updating subscribers)
· Merge replication
30. What are cursors? Explain different types of cursors. What are the disadvantages of cursors? How can you avoid cursors?
Cursors allow row-by-row prcessing of the resultsets.
Types of cursors: Static, Dynamic, Forward-only, Keyset-driven. See books online for more information.
Disadvantages of cursors: Each time you fetch a row from the cursor, it results in a network roundtrip, where as a normal SELECT query makes only one rowundtrip, however large the resultset is. Cursors are also costly because they require more resources and temporary storage (results in more IO operations). Furthere, there are restrictions on the SELECT statements that can be used with some types of cursors.
Most of the times, set based operations can be used instead of cursors. Here is an example:
If you have to give a flat hike to your employees using the following criteria:
Salary between 30000 and 40000 -- 5000 hike
Salary between 40000 and 55000 -- 7000 hike
Salary between 55000 and 65000 -- 9000 hike
In this situation many developers tend to use a cursor, determine each employee's salary and update his salary according to the above formula. But the same can be achieved by multiple update statements or can be combined in a single UPDATE statement as shown below:
UPDATE tbl_emp SET salary =
CASE WHEN salary BETWEEN 30000 AND 40000 THEN salary + 5000
WHEN salary BETWEEN 40000 AND 55000 THEN salary + 7000
WHEN salary BETWEEN 55000 AND 65000 THEN salary + 10000
END
No comments:
Post a Comment