Monday 31 August 2015

Most Recently Asked Assistent Architecture Multiple Choice Questions & Answers

41. If an up grade of +1% on first class railway is followed by a down grade of -2%, then the length of vertical curve will be 
A. 20 chains
B. 40 chains
C. 50 chains
D. 80 chains
Ans: C

42. An outline or -------- should never by used as a dimension line 
A. inner line
B. centre line
C. outer line
D. Perpendicular
Ans: B

43. Mutual crossing of dimension lines and dimensioning between ---------- should be avoided
A. dotted line
B. straight line
C. curved line
D. dashed line
Ans: D

44. The recommended rate of change of grade for second class railways per 20-m distance at sages is 
A. 0.12%
B. 0.1%
C. 0.8%
D. 0.06%
Ans: D

45. The distance between centre to centre of any two adjacent rivets shall not exceed by ____ when the rivets do not lie in the direction of stresses 
A. 12xthickness of the thinnest plate
B. 16x thickness of the thinnest plate
C. 32xthickness of the thinnest plate
D. 32xdiameter of the rivet used
Ans: C

46. A surveyor's chain is made of 
A. cast iron
B. stainless steel
C. aluminium
D. galvanized mild steel
Ans: B

47. If a chain is found to be short, it can be adjusted by
A. straightening the bent links
B. removing one or more circular rings
C. closing the joints that have opened out
D. any of the above
Ans: A

48. A telescope is said to be inverted if its 
A. vertical circle is to its right and the bubble of the telescope is down
B. vertical circle is to its right and the bubble of the telescope is up
C. vertical circle is to its left and the bubble of the telescope is down
D. vertical circle is to its left and the bubble of the telescope is up
Ans: A

49. The cross hairs in the surveying telescope are placed 
A. midway between eye piece and objective lens
B. much closer to the eye piece than to the ob jective lens
C. much closer to the objective lens than to the eye piece
D. anywhere between eye piece and objective lens
Ans: B

50. The foundation in a building is provided to
A. distribute the load over a large area
B. increase overall stability of the structure
C. transmit load to the bearing surface (sub soil) at a uniform rate
D. all of the above
Ans: D

More Questions & Answers:-

No comments:

Post a Comment